18 Oscilloscope Utility Settings
392 InfiniiVision 7000B Series Oscilloscopes User’s Guide
Setting the Oscilloscope’s Clock
The Clock Menu lets you set the current date and time of day (24-hour
format). This time/date stamp will appear on hardcopy prints and
directory information on the USB mass storage device.
To set the date and time, or to view the current date and time:
1 Press [Utility] > Options > Clock.
2 Press the Year, Month, Day, Hour or Minute softkey and rotate the Entry
knob to set to the desired number.
The hours are shown in the 24- hour format. So 1:00 PM is hour 13.
The real- time clock only allows selection of valid dates. If a day is
selected and the month or year is changed so the day is invalid, the day
is automatically adjusted.
To Next Page
Loading...
Need help?
General
