Agilent Technologies 7000B Series - Searching for SPI Data in the Lister

11 I
2
C/SPI Triggering and Serial Decode
300 InfiniiVision 7000B Series Oscilloscopes User’s Guide
Searching for SPI Data in the Lister
The oscilloscope’s search capability lets you search for (and mark) certain
types of SPI data in the Lister. You can use the [Navigate] key and controls
to navigate through the marked rows.
1 With SPI selected as the serial decode mode, press [Search].
2 In the Search Menu, use the Words softkey to specify the number of
words in the data value; then, use the remaining softkeys to enter the
hex digit values.
For more information on searching data, see “Searching Lister Data” on
page 259.
For more information on using the [Navigate] key and controls, see “To
navigate the time base” on page 74.