Saving, Recalling, and Printing 6
InfiniiVision 7000B Series Oscilloscopes User’s Guide 221
Options
Press the Options softkey to change the following options:
• Setup Information — Select to print oscilloscope setup information on your
printout, including vertical, horizontal, trigger, acquisition, math, and
display settings.
• Invert Graticule Colors — The Invert Graticule Colors option can be used to
reduce the amount of black ink it takes to print oscilloscope images by
changing the black background to white. Invert Graticule Colors is the
default mode.
• Form Feed — The Form Feed option can be selected to send a form feed
command to the printer after the waveform is printed and before the
setup information is printed. Switch Form Feed off if you want setup
information printed on the same sheet of paper with the waveform.
This option only has an effect when the Setup Information option is
selected. Also, if the amount of setup information will not fit on the
same page with the waveform, it will be printed on a new page
regardless of the Form Feed setting.
• Landscape — Choose Landscape mode to print horizontally on the page
instead of vertically (portrait mode).
Palette
Press the Palette softkey to change the following options.
• Color — When Color printing is selected, the traces are printed in color.
• Grayscale — When Grayscale printing is selected, the traces are printed in
shades of gray rather than in color.
Graticule Not Inverted Graticule Inverted
To Next Page
Loading...
Need help?
General
