Agilent Technologies 7000B Series User Manual

Triggering 4
InfiniiVision 7000B Series Oscilloscopes User’s Guide 111
4-Channel Oscilloscope External Trigger Input
Input Impedance The external trigger input impedance for the 4- channel
oscilloscope is approximately 2.14 k.
Input Voltage The input voltage sensitivity is 500 mV, from DC to
500 MHz. The input voltage range is ±15 V.
There are no range or units settings for the External Trigger input of the
4- channel oscilloscope.
CAUTION
Maximum voltage at 4-channel oscilloscope external trigger input
15 Vrms. Do not exceed 15 Vrms at rear panel External Trigger input or damage to the
oscilloscope may occur.

Agilent Technologies 7000B Series Specifications

General

Brand	Agilent Technologies
Model	7000B Series
Category	Test Equipment
Language	English