Oscilloscope Utility Settings 18
InfiniiVision 7000B Series Oscilloscopes User’s Guide 397
Performing Service Tasks
• Press the [Utility] > Service to display the Service Menu.
The Service Menu lets you:
• Perform User Calibration on the oscilloscope.
• View User Calibration status.
• Perform instrument Self Test.
• View information about your oscilloscope model number, code revision
information, and User Calibration status.
To display oscilloscope information
Press [Utility] > Service > About Oscilloscope to display information about your
oscilloscope:
• Model number.
• serial number.
• Software version.
• Boot version.
• Graphics version.
• Installed licenses. See also “Entering Licenses and Displaying License
Information” on page 393.
To perform user calibration
Perform user- calibration:
Start
User Cal
Start
Self Test
About
Oscilloscope
User Cal
status
To Next Page
Loading...
