18 Oscilloscope Utility Settings
396 InfiniiVision 7000B Series Oscilloscopes User’s Guide
Upgrading to an MSO
A license can be installed to activate the digital channels of an
oscilloscope that was not originally ordered as a mixed- signal oscilloscope
(MSO). A mixed signal oscilloscope has analog channels plus 16
time- correlated digital timing channels.
To view the currently installed licenses press [Utility] > Options > Licenses >
Show license information.
For information about upgrading your oscilloscope through licensing,
contact your local Agilent Technologies representative or see
www.agilent.com/find/7000.
Secure Environment Mode Option
Secure environment mode is compliant to National Industrial Security
Program Operating Manual (NISPOM) Chapter 8 requirements.
Secure environment mode is called option SEC.
When secure environment mode is installed, trace and setup data are
stored to internal volatile memory (rather than internal non-volatile
memory). Oscilloscope setup, waveform, and trace data are erased when
the power is shut off. This ensures that any setup, waveform, and trace
data will not be visible to the next user upon power- up. The clock and
LAN settings are not discarded upon power- down.
To permanently store data, you can save it to an external device through
one of the oscilloscope’s USB ports.
Once installed, secure environment mode cannot be disabled.
When installed, the secure environment mode license will appear as SEC
in the Installed Licenses line of the “About Oscilloscope” display. To
access the About Oscilloscope display, press the [Utility] key, then press the
Service softkey, then press the About Oscilloscope softkey.
To Next Page
Loading...
