4 Triggering
132 InfiniiVision 7000B Series Oscilloscopes User’s Guide
As you set stage, term, and channel definitions for the sequence trigger,
these settings will be shown in the waveform area of the display.
Define the “Find” Stage
1 Press the Stage softkey and select Find:.
Find: is the first stage in the trigger sequence. When you select the Stage Find softkey,
the next softkey to the right will display Find: and give you a list of the terms you can
define for the Find stage. The Find stage can be set to one of the following conditions:
Channel
select
Stage
select
Find, Trigger on,
or Reset condition
Define
term
Trigger level
or threshold
Sequence
trigger
Select
term
Selected
channel
Sequence stage
definitions
Term definitions
To Next Page
Loading...
