5 Measurements and Math Functions
154 InfiniiVision 7000B Series Oscilloscopes User’s Guide
List of Automatic Measurements
You can press the [Meas] key and select an automatic measurement.
Follow the link or go to the page for details.
Time Measurements
• “Counter” on page 162.
• “Duty Cycle” on page 163.
• “Frequency” on page 163.
• “Period” on page 164.
• “Rise Time” on page 165.
• “Fall Time” on page 165.
• “+ Width” on page 165.
• “– Width” on page 165.
• “X at Max Y” on page 165.
• “X at Min Y” on page 166.
Phase and Delay
• “Phase” on page 167.
• “Delay” on page 166.
Voltage Measurements
• “Average” on page 170.
• “Amplitude” on page 170.
• “Base” on page 170.
• “Extinction Ratio” on page 171.
• “Maximum” on page 171.
• “Minimum” on page 171.
• “Peak-Peak” on page 171.
• “Ratio” on page 171.
• “RMS” on page 171.
• “Std Deviation” on page 172.
To Next Page
Loading...
