239
Agilent InfiniiVision 7000B Series Oscilloscopes
User’s Guide
8
Web Interface
Setting up the Oscilloscope’s LAN Connection 241
Accessing the Web Interface 244
Browser Web Control 245
Get Image 250
Identification Function 251
Instrument Utilities 252
Setting a Password 253
The Agilent InfiniiVision oscilloscopes have a LAN interface and a built- in
web server; these let you use a Java™- enabled web browser remotely to:
• View information about the oscilloscope like its model number, serial
number, host name, IP address, and VISA (address) connect string.
• Control the oscilloscope using the Remote Front Panel.
• Send SCPI (Standard Commands for Programmable Instrumentation)
remote programming commands via the SCPI Commands applet window.
• Get screen images and save or print them from the browser.
• Activate the Identification function to identify a particular instrument
by causing a message to be displayed or a front panel light to blink.
• View installed options, view firmware versions and install firmware
upgrade files, and view calibration status (via the Instrument Utilities
page).
• View and modify the oscilloscope’s network configuration and status
information.
The web interface for InfiniiVision oscilloscope also provides help for each
of its pages.
To Next Page
Loading...
Need help?
General
