Agilent Technologies 7000B Series User Manual

8Web Interface
254 InfiniiVision 7000B Series Oscilloscopes User’s Guide
4 Enter your desired password, and click Apply Changes.
When accessing the password protected oscilloscope, the user name is the
IP address of the oscilloscope.
To reset the password
Do one of these things to reset the password:
• Using the keys on the front panel of the oscilloscope, press [Utility] > I/O
> LAN Reset
• Using the web browser select the Configure Network tab, select Modify
Configuration, erase the Password, and select Apply Changes.
Step 3

Agilent Technologies 7000B Series Specifications

General

Brand	Agilent Technologies
Model	7000B Series
Category	Test Equipment
Language	English