Agilent Technologies 7000B Series User Manual

7 Acquisition Modes
230 InfiniiVision 7000B Series Oscilloscopes User’s Guide
To use the Averaging mode
1 Press the [Acquire] key, then press the Acq Mode softkey until the
Averaging mode is selected.
2 Press the #Avgs softkey and turn the Entry knob to set the number of
averages that best eliminates the noise from the displayed waveform.

Agilent Technologies 7000B Series Specifications

General

Brand	Agilent Technologies
Model	7000B Series
Category	Test Equipment
Language	English