9 Serial Decode/Lister
258 InfiniiVision 7000B Series Oscilloscopes User’s Guide
Pressing [Single] instead of [Stop] fills the maximum memory depth.
When zoomed out and viewing a large number of packets, the Lister
may not be able to display information for all packets. However, when
you press the [Single] key the Lister will contain all on- screen serial
decode information.
5 Press the Scroll Lister softkey and use the Entry knob to scroll through
the data.
Time tags in the Time column indicate the event time relative to the
trigger point. The time tags of events that are shown in the waveform
display area are displayed with a dark background.
6 Press the Zoom to Selection softkey (or push the Entry knob) to center
the waveform display at the time associated with the selected Lister
row and automatically set the horizontal scale setting.
7 Press the Undo Zoom softkey to return to the horizontal scale and delay
settings before the last Zoom to Selection.
8 Press the Options softkey to open the Lister Options Menu. In this menu,
you can:
• Enable or disable the Track Time option. When enabled, as you select
different Lister rows (using the Entry knob while acquisitions are
stopped), the horizontal delay changes to the Time of the selected
row.
To Next Page
Loading...
Need help?
General
