APRILIA RSV4 R User Manual

124. Lower injector 3 cable harness connector
(output "17") - green connector
125. Coil 3 - long cable harness
126. Coil 1 - short cable harness
TABLE ZE - COIL AND MAP SENSOR CON-
NECTION
Once the filter box is assembled, the coil and map
sensor connections must be made. The connec-
tors for the 4 coils (AMP Superseal male plug
terminals) must be placed on the mountings that
were previously fit on the filter box: to do this, insert
the slide positioned under the connector in the
plastic tooth of the mounting.
Passage of coil 3 and coil 1 cables between the
Fuel Rail and the filter box
127. Coil 1 connector
128. Coil 1 cable harness connector (output "29")
129. Coil 3 connector
130. Coil 3 cable harness connector (output "28")
TABLE ZF
131. Coil 4 cable harness connector (output "8")
132. Coil 4 connector
TABLE ZG
133. Coil 2 connector
134. Coil 2 cable harness connector (output "7")
135. Map sensor 2
136. Self-tapping 5x20 screw
137. Map sensor 2 cable harness connector (out-
put "11")
138. Insert the tape clamp on the cable harness in
the free hole on the filter box
Electrical system RSV4 R
ELE SYS - 120

APRILIA RSV4 R Specifications

General

Displacement	999.6 cc
Torque	115 Nm @ 10, 000 rpm
Transmission	6-speed
Frame	Aluminum dual beam chassis
Seat Height	845 mm
Dry Weight	179 kg
Bore x Stroke	78 x 52.3 mm
Front Tire	120/70 ZR17
Rear Tire	190/55 ZR17
Wheelbase	1420 mm
Power	180 hp @ 12, 500 rpm
Front Suspension	Upside-down fork, 43 mm
Front Brakes	Dual 320 mm discs, radial calipers
Rear Brakes	220 mm disc, Brembo caliper
Fuel System	Fuel injection
Fuel Capacity	18.5 L (4.9 US gal)