APRILIA RSV4 R User Manual

TABLE C2 - HEADLAMP PRE-FITTING
16. Cable grommet 17. Relay with relay socket
rubber ring 25. Cable harness routing behind the
relay
TABLE D - HANDLEBAR CONTROLS
26. Left handlebar control
27. Clutch connector
28. Right handlebar control
TABLE E - INSTRUMENT HOLDER ARCH
BRACE AND FRONT PART
Use a clamp (31) to fasten the vehicle cable har-
ness, in correspondence of the grey taping, on the
specific seat located on the instrument holder arch
brace.
Connect the Immobilizer antenna connector (30)
to the corresponding cable harness connector.
29. Antenna connector
30. Key switch
31. Clamp
Electrical system RSV4 R
ELE SYS - 102

APRILIA RSV4 R Specifications

General

Displacement	999.6 cc
Torque	115 Nm @ 10, 000 rpm
Transmission	6-speed
Frame	Aluminum dual beam chassis
Seat Height	845 mm
Dry Weight	179 kg
Bore x Stroke	78 x 52.3 mm
Front Tire	120/70 ZR17
Rear Tire	190/55 ZR17
Wheelbase	1420 mm
Power	180 hp @ 12, 500 rpm
Front Suspension	Upside-down fork, 43 mm
Front Brakes	Dual 320 mm discs, radial calipers
Rear Brakes	220 mm disc, Brembo caliper
Fuel System	Fuel injection
Fuel Capacity	18.5 L (4.9 US gal)