APRILIA RSV4 R User Manual

Outer
58. Fuel pump connector
59. Insert the tape clamp on the cable harness in the hole on the right side of the saddle mounting
60. variable length intake duct control unit connector
61. Clamp
Inner
62. Speed sensor connector
63. Rear brake switch connector
TABLE F6 - LEFT SIDE SADDLE MOUNTING
64. Battery - engine ground lead
65. Cable grommet
TABLE G - INTAKE DUCT CONTROL UNIT AND
TANK
After fitting the tank and connecting the fuel line
push fitting, the fuel pump connector (66) can be
connected and positioned as shown in the figure.
No clamps are necessary.
66. Fuel pump connector
Electrical system RSV4 R
ELE SYS - 130

APRILIA RSV4 R Specifications

General

Displacement	999.6 cc
Torque	115 Nm @ 10, 000 rpm
Transmission	6-speed
Frame	Aluminum dual beam chassis
Seat Height	845 mm
Dry Weight	179 kg
Bore x Stroke	78 x 52.3 mm
Front Tire	120/70 ZR17
Rear Tire	190/55 ZR17
Wheelbase	1420 mm
Power	180 hp @ 12, 500 rpm
Front Suspension	Upside-down fork, 43 mm
Front Brakes	Dual 320 mm discs, radial calipers
Rear Brakes	220 mm disc, Brembo caliper
Fuel System	Fuel injection
Fuel Capacity	18.5 L (4.9 US gal)