APRILIA RSV4 R User Manual

•
Via the filler orifice on the expansion
tank, fill with the quantity of coolant
necessary to reach the FULL marking,
then refit the cap.
•
Start the engine, run at idle speed and
wait for the electric fans to activate (ap-
prox. 101 °C - 213 °F) then turn off the
engine and wait for it to cool.
•
With the vehicle standing vertically,
check the liquid level both in the radia-
tor and in the expansion tank and top
up if necessary.
Water pump
•
Drain the coolant.
•
Remove the pipe from the radiator.
•
Unscrew and remove the two screws
fastening the pipe to the engine.
•
Retrieve the gasket and replace with a
new component when refitting.
See also
Coolant replacement
RSV4 R Cooling system
COOL SYS - 437

APRILIA RSV4 R Specifications

General

Displacement	999.6 cc
Torque	115 Nm @ 10, 000 rpm
Transmission	6-speed
Frame	Aluminum dual beam chassis
Seat Height	845 mm
Dry Weight	179 kg
Bore x Stroke	78 x 52.3 mm
Front Tire	120/70 ZR17
Rear Tire	190/55 ZR17
Wheelbase	1420 mm
Power	180 hp @ 12, 500 rpm
Front Suspension	Upside-down fork, 43 mm
Front Brakes	Dual 320 mm discs, radial calipers
Rear Brakes	220 mm disc, Brembo caliper
Fuel System	Fuel injection
Fuel Capacity	18.5 L (4.9 US gal)