APRILIA RSV4 R User Manual

•
Tap the wheel spindle slightly to extract
the head from its seat.
•
Make the wheel move forward and re-
lease the gearing chain from the
sprocket.
•
Remove the wheel spindle together
with the right hand chain tensioner
skid.
•
Remove the wheel by freeing the disc
from the brake calliper.
•
Holding the outer rim of the sprocket with both hands, slide off the final transmission unit by
pulling it parallel to the wheel axis.
OPERATE WITH CAUTION. IF THE FINAL TRANSMISSION UNIT IS INSTALLED ON THE ANTI-
VIBRATION BUFFER HOLDER, DO NOT TURN OVER O ROTATE THE REAR WHEEL SPROCKET
SIDE HORIZONTALLY, OR THE FINAL TRANSMISSION UNIT COULD SLIDE OUT AND FALL,
AND THE SPROCKET MAY GET DAMAGED.
CAUTION
DO NOT UNSCREW THE FIVE NUTS. THE FINAL TRANSMISSION UNIT CAN BE SLID OFF COM-
PLETELY FROM THE ANTI-VIBRATION BUFFER HOLDER.
•
Remove the final transmission unit.
CAUTION
THE FLEXIBLE COUPLINGS REMAIN FITTED ON THEIR
HOLDER.
•
Remove all the flexible couplings.
Suspensions RSV4 R
SUSP - 386

APRILIA RSV4 R Specifications

General

Displacement	999.6 cc
Torque	115 Nm @ 10, 000 rpm
Transmission	6-speed
Frame	Aluminum dual beam chassis
Seat Height	845 mm
Dry Weight	179 kg
Bore x Stroke	78 x 52.3 mm
Front Tire	120/70 ZR17
Rear Tire	190/55 ZR17
Wheelbase	1420 mm
Power	180 hp @ 12, 500 rpm
Front Suspension	Upside-down fork, 43 mm
Front Brakes	Dual 320 mm discs, radial calipers
Rear Brakes	220 mm disc, Brembo caliper
Fuel System	Fuel injection
Fuel Capacity	18.5 L (4.9 US gal)