EasyManua.ls Logo

AudioCodes Mediant 800B - DHCP Parameters

AudioCodes Mediant 800B
1338 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Version 7.2 1079 Mediant 800B Gateway & E-SBC
User's Manual 72. Configuration Parameters Reference
72.2.8 DHCP Parameters
The Dynamic Host Control Protocol (DHCP) parameters are described in the table below.
Table 72-16: DHCP Parameters
Parameter Description
Enable DHCP
[DHCPEnable]
Enables DHCP client functionality.
[0] Disable (default)
[1] Enable
Note:
For the parameter to take effect, a device reset is required.
For a detailed description of DHCP, see 'DHCP-based Provisioning'
on page 877.
The parameter is a "hidden" parameter. Once defined and saved to
flash memory, its value doesn't revert to default even if the parameter
doesn't appear in the ini file.
[DHCP120OptionMode] Enables the acceptance of DHCP Option 120 in DHCP responses sent
by a DHCP server.
[0] = DHCP Option 120 is not supported and ignored if received in the
DHCP response.
[1] = (Default) DHCP Option 120 is supported and if received, the
device adds the SIP server information to the Proxy Set.
[DHCPSpeedFactor] Defines the device's DHCP renewal speed for a leased IP address from
a DHCP server.
[0] = Disable
[1] = (Default) Normal
[2] to [10] = Fast
When set to 0, the DHCP lease renewal is disabled. Otherwise, the
renewal time is divided by this factor. Some DHCP-enabled routers
perform better when set to 4.
Note: For the parameter to take effect, a device reset is required.
DHCP Servers Table
DHCP Servers Table
configure network > dhcp
server <index>
[DhcpServer]
Defines the device's embedded DHCP server.
The format of the ini file table parameter is as follows:
[ DhcpServer ]
FORMAT DhcpServer_Index = DhcpServer_InterfaceName,
DhcpServer_StartIPAddress, DhcpServer_EndIPAddress,
DhcpServer_SubnetMask, DhcpServer_LeaseTime,
DhcpServer_DNSServer1, DhcpServer_DNSServer2,
DhcpServer_NetbiosNameServer, DhcpServer_NetbiosNodeType,
DhcpServer_NTPServer1, DhcpServer_NTPServer2,
DhcpServer_TimeOffset, DhcpServer_TftpServer,
DhcpServer_BootFileName, DhcpServer_ExpandBootfileName,
DhcpServer_OverrideRouter, DhcpServer_SipServer,
DhcpServer_SipServerType;
[ \DhcpServer ]
For more information, see Configuring the Device's DHCP Server.
DHCP Vendor Class Table

Table of Contents

Other manuals for AudioCodes Mediant 800B

Related product manuals