User's Manual 270 Document #: LTRT-10632
Mediant 800B Gateway & E-SBC
15.4.8.2 Clearing the LDAP Cache
You can remove (clear) all LDAP entries in the device's LDAP cache for a specific LDAP
Server Group, as described in the following procedure.
To clear the LDAP cache:
1. Open the LDAP Settings page (Setup menu > IP Network tab > RADIUS & LDAP
folder > LDAP Settings).
2. Under the Cache Actions group, do the following:
a. From the 'LDAP Group Index' drop-down list, select the required LDAP Server
Group (see 'Configuring LDAP Server Groups' on page 256).
b. Click Clear Group.
To Next Page
Loading...
