User's Manual 900 Document #: LTRT-10632
Mediant 800B Gateway & E-SBC
53.1 Starting the SBC Configuration Wizard
The following procedure describes how to start the SBC Configuration Wizard. Throughout
the wizard, you can get help on the current wizard page, by clicking the icon, located
on the top-right of the page.
 To start the SBC Configuration Wizard:
1. Access the SBC Configuration Wizard welcome page:
• Toolbar: Click Actions, and then from the drop-down list, choose Configuration
Wizard.
• Navigation Tree: Setup menu > Administration tab > Maintenance folder >
Configuration Wizard.
Figure 53-1: SBC Configuration Wizard - Welcome Page
2. If desired, the SBC Configuration Wizard allows you to share usage statistics with
AudioCodes in order to help us improve our software. To agree, select the 'Report
usage statistics' check box, and then fill in the subsequent fields.
3. The version of the template pack currently installed on the device is displayed in the
'Template pack version' field. The template pack contains the interoperability
configuration templates available on the SBC Configuration Wizard. If the template
pack is not the latest version (as displayed in the 'Remote Template pack version'
field), you can update it by clicking the Update from remote server button.
Alternatively, if you have received a template pack file from AudioCodes sales
representative, you can install it on the device using the Auxiliary Files page (see
Loading Auxiliary Files on page 831).
4. Click Next; the General Setup page appears (see General Setup Page on page 901).
To Next Page
Loading...
Need help?
General
