AudioCodes Mediant 800B - Configuring Voice Mail

User's Manual 626 Document #: LTRT-10632
Mediant 800B Gateway & E-SBC
Table 27-7: Charge Codes Table Parameter Descriptions
Parameter Description
Index
[ChargeCode_Index]
Defines an index number for the new table row.
Note: Each row must be configured with a unique index.
Name
charge-code-name
[ChargeCode_ChargeCodeName]
Defines a descriptive name, which is used when associating the
row in other tables.
The valid value is a string of up to 40 characters.
Note: Each row must be configured with a unique name.
End Time (1 - 4)
end-time-<1-4>
[ChargeCode_EndTime<1-4>]
Defines the end of the time period in a 24 hour format, hh. For
example, "04" denotes 4 A.M.
Note:
 The first time period always starts at midnight (00).
 It is mandatory that the last time period of each rule end at
midnight (00). This prevents undefined time frames in a day.
Pulse Interval (1 - 4)
pulse-interval-<1-4>
[ChargeCode_PulseInterval<1-4>]
Defines the time interval between pulses (in tenths of a second).
Once the call is established, the device generates a pulse for
each pulse interval.
Pulses On Answer (1 - 4)
pulses-on-answer-<1-4>
[ChargeCode_PulsesOnAnswer<1-
4>]
Defines the number of pulses that the device generates upon
call answer.
27.18 Configuring Voice Mail
The Voice Mail Settings page lets you configure voice mail. For more information on voice
mail, refer to the CPE Configuration Guide for Voice Mail User's Manual. For a detailed
description of the voice mail parameters, see 'Voice Mail Parameters' on page 1182.
Note: Voice Mail is applicable only to FXO and CAS interfaces.
 To configure voice mail:
1. Open the Voice Mail Settings page (Setup menu > Signaling & Media tab > Gateway
folder > Voice Mail Settings).