AudioCodes Mediant 800B - Configuring IP Profiles

User's Manual 436 Document #: LTRT-10632
Mediant 800B Gateway & E-SBC
4. Click Apply.
5. Select the new row that you configured, and then click the Allowed Video Coders link
located below the table; the Allowed Video Coders table opens.
6. Click New; the following dialog box appears:
Figure 20-7: Allowed Video Coders Table - Add Dialog Box
7. Configure coders for the Allowed Video Coders Group according to the parameters
described in the table below.
8. Click Apply.
Table 20-4: Allowed Video Coders Groups and Allowed Video Coders Tables Parameter
Descriptions
Parameter Description
Allowed Video Coders Groups Table
Index
allowed-video-coders-groups <index>
[AllowedVideoCodersGroups_Index]
Defines an index number for the new table row.
Note:
Each row must be configured with a unique
index.
Name
coders-group-name
[AllowedVideoCodersGroups_Name]
Defines a descriptive name, which is used when
associating the row in other tables.
The valid value is a string of up to 40 characters.
Note:
Each row must be configured with a unique
name.
Allowed Video Coders Table
Index
allowed-video-coders <group index/coder index>
[AllowedVideoCoders_AllowedVideoCodersIndex]
Defines an index number for the new table row.
Note:
Each row must be configured with a unique
index.
User Define Coder
user-define-coder
[AllowedVideoCoders_UserDefineCoder]
Defines a user-defined coder.
The valid value is a string of up to 24 characters
(case-insensitive). For example, "HD.123"
(without quotes).
Note: Each coder can be configured only once
per Allowed Video Coders Group.
20.4 Configuring IP Profiles
The IP Profiles table lets you configure up to 20 IP Profiles. An IP Profile is a set of
parameters with user-defined settings relating to signaling (e.g., SIP message terminations
such as REFER) and media (e.g., coder type). An IP Profile can later be assigned to