Version 7.2 1187 Mediant 800B Gateway & E-SBC
User's Manual 72. Configuration Parameters Reference
Parameter Description
Forward on Busy Digit Pattern
(External)
configure voip > gateway voice-mail-
setting > fwd-bsy-dig-ptrn-ext
[DigitPatternForwardOnBusyExt]
Defines the digit pattern used by the PBX to indicate 'call
forward on busy' when the original call is received from an
external line (not an internal extension).
The valid range is a 120-character string.
Forward on No Answer Digit Pattern
(External)
configure voip > gateway voice-mail-
setting > fwd-no-ans-dig-pat-ext
[DigitPatternForwardOnNoAnswerExt]
Defines the digit pattern used by the PBX to indicate 'call
forward on no answer' when the original call is received from
an external line (not an internal extension).
The valid range is a 120-character string.
Forward on Do Not Disturb Digit
Pattern (External)
configure voip > gateway voice-mail-
setting > fwd-dnd-dig-ptrn-ext
[DigitPatternForwardOnDNDExt]
Defines the digit pattern used by the PBX to indicate 'call
forward on do not disturb' when the original call is received
from an external line (not an internal extension).
The valid range is a 120-character string.
Forward on No Reason Digit Pattern
(External)
configure voip > gateway voice-mail-
setting > fwd-no-rsn-dig-ptrn-ext
[DigitPatternForwardNoReasonExt]
Defines the digit pattern used by the PBX to indicate 'call
forward with no reason' when the original call is received
from an external line (not an internal extension).
The valid range is a 120-character string.
Internal Call Digit Pattern
configure voip > gateway voice-mail-
setting > int-call-dig-ptrn
[DigitPatternInternalCall]
Defines the digit pattern used by the PBX to indicate an
internal call.
The valid range is a 120-character string.
External Call Digit Pattern
configure voip > gateway voice-mail-
setting > ext-call-dig-ptrn
[DigitPatternExternalCall]
Defines the digit pattern used by the PBX to indicate an
external call.
The valid range is a 120-character string.
Disconnect Call Digit Pattern
configure voip > gateway voice-mail-
setting > disc-call-dig-ptrn
[TelDisconnectCode]
Defines a digit pattern that when received from the Tel side,
indicates the device to disconnect the call.
The valid range is a 25-character string.
Digit To Ignore Digit Pattern
configure voip > gateway voice-mail-
setting > dig-to-ignore-dig-pattern
[DigitPatternDigitToIgnore]
Defines a digit pattern that if received as Src (S) or Redirect
(R) numbers is ignored and not added to that number.
The valid range is a 25-character string.
72.11.5 Supplementary Services Parameters
This subsection describes the device's supplementary telephony services parameters.
72.11.5.1 Caller ID Parameters
The caller ID parameters are described in the table below.
To Next Page
Loading...
