AudioCodes Mediant 800B User Manual

User's Manual 1314 Document #: LTRT-10632
Mediant 800B Gateway & E-SBC
Parameter Description
SBCRoutingPolicy_LCRDefaultCost,
SBCRoutingPolicy_LdapServerGroupName;
[\SBCRoutingPolicy]
For more information, see 'Configuring SBC Routing
Policy Rules' on page 730.
Dial Plan Table
Dial Plan
configure voip > sbc dial-plan
[DialPlans]
Defines the name of the Dial Plan.
The format of the ini file table parameter is as follows:
[ DialPlan ]
FORMAT DialPlan_Index = DialPlan_Name;
[ \DialPlan ]
For more information, see 'Configuring Dial Plans' on
page 751.
Dial Plan Rule Table
Dial Plan Rule
configure voip > sbc dial-plan-
rule
[DialPlanRule]
Defines the dial plan rules per Dial Plan.
For more information, see 'Configuring Dial Plans' on
page 751.
Note:
 The table is hidden in the ini file.
 To configure Dial Plan rules from a file, see
'Importing and Exporting Dial Plans' on page 757.
Malicious Signature Table
Malicious Signature
configure voip > sbc malicious-
signature-database
[MaliciousSignatureDB]
Defines the malicious signature patterns
The format of the ini file table parameter is as follows:
[ MaliciousSignatureDB ]
FORMAT MaliciousSignatureDB_Index =
MaliciousSignatureDB_Name,
MaliciousSignatureDB_Pattern;
[ \MaliciousSignatureDB ]
For more information, see 'Configuring Malicious
Signatures' on page 767.
72.12.1 Supplementary Services
The SBC and CRP supplementary services parameters are described in the table below.
Table 72-74: SBC and CRP Supplementary Services Parameters
Parameter Description
Emergency Call Preemption Parameters
For more information on SBC emergency call preemption, 'Configuring Call Preemption for SBC
Emergency Calls' on page 769.
SBC Preemption Mode
configure voip > sbc settings >
sbc-preemption-mode
[SBCPreemptionMode]
Enables SBC emergency call preemption.
 [0] Disable (default)
 [1] Enable

AudioCodes Mediant 800B Specifications

General

Brand	AudioCodes
Model	Mediant 800B
Category	Gateway
Language	English