User's Manual 72 Document #: LTRT-10632
Mediant 800B Gateway & E-SBC
6.2.1 Replacing the Corporate Logo
You can replace the default corporate logo image (i.e., AudioCodes logo) that is displayed
in the Web interface. The logo appears in the following Web areas:
Web Login screen:
Figure 6-20: Corporate Logo on Web Login Screen
Menu bar:
Figure 6-21: Corporate Logo on Menu Bar
You can replace the logo with one of the following:
A different image (see Replacing the Corporate Logo with an Image on page 72)
Text (see Replacing the Corporate Logo with Text on page 73)
6.2.1.1 Replacing the Corporate Logo with an Image
You can replace the logo with a different image. The following figure displays an example
where the default logo (top) is replaced with a different image (bottom):
Figure 6-22: Customizing Web Logo Image
To customize the logo:
1. Save your new logo image file in a folder on the same PC that you are using to access
the device's Web interface.
2. In your browser's URL address field, append the case-sensitive suffix "/AdminPage" to
the device's IP address (e.g., http://10.1.229.17/AdminPage).
3. Log in with your credentials; the Admin page appears.
To Next Page
Loading...
