User's Manual 892 Document #: LTRT-10632
Mediant 800B Gateway & E-SBC
CptFileURL =
'https://www.company.com/call_progress.dat'
♦ CLI:
# configure system
(config-system)# automatic update
(automatic-update)# call-progress-tones
'http://www.company.com/call_progress.dat'
d. Automatic Update of ini configuration file:
♦ ini File:
IniFileURL = 'https://www.company.com/config.ini'
♦ CLI:
# configure system
(config-system)# automatic update
(automatic-update)# voice-configuration
'http://www.company.com/config.ini'
e. Enable Cyclical Redundancy Check (CRC) on downloaded ini file:
♦ ini File:
AUPDCheckIfIniChanged = 1
♦ CLI:
# configure system
(config-system)# automatic update
(automatic-update)# crc-check regular
4. Power down and then power up the device.
51.2.10.2 Automatic Update from Remote Servers
This example describes how to configure the Automatic Update feature where files are
stored and downloaded from different file server types. The example scenario includes the
following:
FTPS server at ftpserver.corp.com for storing the Feature Key file. The login
credentials to the server are username "root" and password "wheel".
HTTP server at www.company.com for storing the configuration file (ini).
DNS server at 80.179.52.100 for resolving the domain names of the provisioning
servers (FTPS and HTTP).
To set up Automatic Provisioning for files stored on different server types
(example):
1. Feature Key file:
a. Set up an FTPS server and copy the Feature Key file to the server.
b. Configure the device with the URL path of the Feature Key file:
♦ ini File:
FeatureKeyURL =
'ftps://root:wheel@ftpserver.corp.com/feature_key.txt'
♦ CLI:
# configure system
(config-system)# automatic update
(automatic-update)# feature-key
'ftps://root:wheel@ftpserver.corp.com/feature_key.txt'
2. Software (.cmp) and ini files:
a. Set up an HTTP Web server and copy the .cmp and configuration files to the
server.
To Next Page
Loading...
Need help?
General
