AudioCodes Mediant 800B - Channel Parameters

Version 7.2 1157 Mediant 800B Gateway & E-SBC
User's Manual 72. Configuration Parameters Reference
Parameter Description
IpProfile_SBCRTCPMux, IpProfile_SBCMediaSecurityMethod,
IpProfile_SBCHandleXDetect, IpProfile_SBCRTCPFeedback,
IpProfile_SBCRemoteRepresentationMode,
IpProfile_SBCKeepVIAHeaders, IpProfile_SBCKeepRoutingHeaders,
IpProfile_SBCKeepUserAgentHeader,
IpProfile_SBCRemoteMultipleEarlyDialogs,
IpProfile_SBCRemoteMultipleAnswersMode,
IpProfile_SBCDirectMediaTag,
IpProfile_SBCAdaptRFC2833BWToVoiceCoderBW,
IpProfile_CreatedByRoutingServer, IpProfile_SBCFaxReroutingMode,
IpProfile_SBCMaxCallDuration, IpProfile_SBCGenerateRTP,
IpProfile_SBCISUPBodyHandling, IpProfile_SBCISUPVariant,
IpProfile_SBCVoiceQualityEnhancement, IpProfile_SBCMaxOpusBW,
IpProfile_LocalRingbackTone, IpProfile_LocalHeldTone;;
[\IPProfile]
For more information, see 'Configuring IP Profiles' on page 436.
Tel Profiles Table
Tel Profiles
configure voip > coders-
and-profiles tel-profile
[TelProfile]
Defines the Tel Profile table. Each Tel Profile ID includes a set of
parameters (which are typically configured separately using their
individual, "global" parameters). You can later assign these Tel Profile
IDs to other elements such as in the Trunk Group table (TrunkGroup
parameter). Therefore, Tel Profiles allow you to apply the same settings
of a group of parameters to multiple channels, or apply specific settings
to different channels.
The format of the ini file table parameter is as follows:
[TelProfile]
FORMAT TelProfile_Index = TelProfile_ProfileName,
TelProfile_TelPreference, TelProfile_CodersGroupName,
TelProfile_IsFaxUsed, TelProfile_JitterBufMinDelay,
TelProfile_JitterBufOptFactor, TelProfile_IPDiffServ,
TelProfile_SigIPDiffServ, TelProfile_DtmfVolume, TelProfile_InputGain,
TelProfile_VoiceVolume, TelProfile_EnableReversePolarity,
TelProfile_EnableCurrentDisconnect, TelProfile_EnableDigitDelivery,
TelProfile_EnableEC, TelProfile_MWIAnalog, TelProfile_MWIDisplay,
TelProfile_FlashHookPeriod, TelProfile_EnableEarlyMedia,
TelProfile_ProgressIndicator2IP, TelProfile_TimeForReorderTone,
TelProfile_EnableDIDWink, TelProfile_IsTwoStageDial,
TelProfile_DisconnectOnBusyTone, TelProfile_EnableVoiceMailDelay,
TelProfile_DialPlanIndex, TelProfile_Enable911PSAP,
TelProfile_SwapTelToIpPhoneNumbers, TelProfile_EnableAGC,
TelProfile_ECNlpMode, TelProfile_DigitalCutThrough,
TelProfile_EnableFXODoubleAnswer, TelProfile_CallPriorityMode,
TelProfile_FXORingTimeout, TelProfile_JitterBufMaxDelay,
TelProfile_PlayBusyTone2Isdn;
[\TelProfile]
For a description of the parameter, see Configuring Tel Profiles on page
473.
72.10 Channel Parameters
This subsection describes the device's channel parameters.