AudioCodes Mediant 800B - Control Network Parameters; IP Group, Proxy, Registration and Authentication Parameters

Version 7.2 1107 Mediant 800B Gateway & E-SBC
User's Manual 72. Configuration Parameters Reference
Parameter Description
Performance Profile
configure system >
performance-profile
[PerformanceProfile]
Defines alarm thresholds per metric (ASR, ACD and NER).
The format of the ini file table parameter is as follows:
[ PerformanceProfile ]
FORMAT PerformanceProfile_Index = PerformanceProfile_Entity,
PerformanceProfile_IPGroupName, PerformanceProfile_SRDName,
PerformanceProfile_PMType, PerformanceProfile_MinorThreshold,
PerformanceProfile_MajorThreshold, PerformanceProfile_Hysteresis,
PerformanceProfile_MinimumSample, PerformanceProfile_WindowSize;
[ \PerformanceProfile ]
For more information, see 'Configuring Performance Profiles' on page
939.
72.7 Control Network Parameters
72.7.1 IP Group, Proxy, Registration and Authentication Parameters
The proxy server, registration and authentication SIP parameters are described in the table
below.
Table 72-32: Proxy, Registration and Authentication SIP Parameters
Parameter Description
IP Groups Table
IP Groups
configure voip > ip-group
[IPGroup]
This table configures IP Groups.
The format of the ini file table parameter is:
[ IPGroup ]
FORMAT IPGroup_Index = IPGroup_Type, IPGroup_Name,
IPGroup_ProxySetName, IPGroup_SIPGroupName,
IPGroup_ContactUser, IPGroup_SipReRoutingMode,
IPGroup_AlwaysUseRouteTable, IPGroup_SRDName,
IPGroup_MediaRealm, IPGroup_ClassifyByProxySet,
IPGroup_ProfileName, IPGroup_MaxNumOfRegUsers,
IPGroup_InboundManSet, IPGroup_OutboundManSet,
IPGroup_RegistrationMode, IPGroup_AuthenticationMode,
IPGroup_MethodList, IPGroup_EnableSBCClientForking,
IPGroup_SourceUriInput, IPGroup_DestUriInput,
IPGroup_ContactName, IPGroup_Username,
IPGroup_Password, IPGroup_UUIFormat, IPGroup_QOEProfile,
IPGroup_BWProfile, IPGroup_AlwaysUseSourceAddr,
IPGroup_MsgManUserDef1, IPGroup_MsgManUserDef2,
IPGroup_SIPConnect, IPGroup_SBCPSAPMode,
IPGroup_DTLSContext, IPGroup_CreatedByRoutingServer,
IPGroup_UsedByRoutingServer, IPGroup_SBCOperationMode,
IPGroup_SBCRouteUsingRequestURIPort,
IPGroup_SBCKeepOriginalCallID, IPGroup_TopologyLocation,
IPGroup_SBCDialPlanName, IPGroup_CallSetupRulesSetId,
IPGroup_Tags, IPGroup_SBCUserStickiness;
[/IPGroup]
For more information, see 'Configuring IP Groups' on page 365.