AudioCodes Mediant 800B - Page 1106

User's Manual 1106 Document #: LTRT-10632
Mediant 800B Gateway & E-SBC
Parameter Description
Quality of Experience
Profile
configure voip > qoe qoe-
profile
[QOEProfile]
The table defines Quality of Experience Profiles.
The format of the ini file table parameter is as follows:
[QOEProfile]
FORMAT QOEProfile_Index = QOEProfile_Name,
QOEProfile_SensitivityLevel;
[\QOEProfile]
For more information, see 'Configuring Quality of Experience Profiles' on
page 327.
Quality of Experience Color Rules Table
Quality of Experience
Color Rules
configure voip > qoe qoe-
color-rules
[QOEColorRules]
The table defines Quality of Experience Color Rules.
The format of the ini file table parameter is as follows:
[QOEColorRules]
FORMAT QOEColorRules_Index = QOEColorRules_QoeProfile,
QOEColorRules_ColorRuleIndex, QOEColorRules_monitoredParam,
QOEColorRules_direction, QOEColorRules_profile,
QOEColorRules_MinorThreshold, QOEColorRules_MinorHysteresis,
QOEColorRules_MajorThreshold, QOEColorRules_MajorHysteresis;
[\QOEColorRules]
For more information, see 'Configuring Quality of Experience Profiles' on
page 327.
Bandwidth Profile Table
Bandwidth Profile
configure voip > qoe bw-
profile
[BWProfile]
The table defines Bandwidth Profiles.
The format of the ini file table parameter is as follows:
[BWProfile]
FORMAT BWProfile_Index = BWProfile_Name,
BWProfile_EgressAudioBandwidth, BWProfile_IngressAudioBandwidth,
BWProfile_EgressVideoBandwidth, BWProfile_IngressVideoBandwidth,
BWProfile_TotalEgressBandwidth, BWProfile_TotalIngressBandwidth,
BWProfile_WarningThreshold, BWProfile_hysteresis,
BWProfile_GenerateAlarms;
[\BWProfile]
For more information, see 'Configuring Bandwidth Profiles' on page 332.
Note: For the parameter to take effect, a device reset is required.
Quality of Service Rules Table
Quality of Service Rules
configure voip > qoe
quality-of-service-rules
[QualityOfServiceRules]
Defines Quality of Service rules.
The format of the ini file table parameter is as follows:
[ QualityOfServiceRules ]
FORMAT QualityOfServiceRules_Index =
QualityOfServiceRules_IPGroupName,
QualityOfServiceRules_RuleMetric, QualityOfServiceRules_Severity,
QualityOfServiceRules_RuleAction,
QualityOfServiceRules_CallsRejectDuration,
QualityOfServiceRules_AltIPProfileName;
[ \QualityOfServiceRules ]
For more information, see 'Configuring Quality of Service Rules' on page
335
Performance Profile Table