User's Manual 84 Document #: LTRT-10632
Mediant 800B Gateway & E-SBC
Once enabled, each time you login to the device, the Login Information window is
displayed, as shown in the example below:
Figure 6-31: Login Information Window
To close the window, click Close.
6.6 Viewing Logged-In User Information
The username of the currently logged in user is displayed in the top-right corner of the Web
interface. If you click the username (e.g., "Admin"), a pop-up callout appears:
Figure 6-32: Logged-in User Information
The following information is displayed:
'Access Level': User level of the currently logged in user (e.g., Security Administrator).
'Session Time': Duration of the current Web session (starting from login).
The Log Out button is also provided for logging out of the Web session (see 'Logging Off
the Web Interface' on page 71).
6.7 Configuring Web Session and Access Settings
The following procedure describes how to configure security features related to Web user
sessions and access.
Note: You can only perform the configuration described in this section if you are a
management user with Security Admi
nistrator level or Master level. For more
information, see 'Configuring Management User Accounts' on page 79.
To Next Page
Loading...
