User's Manual 1270 Document #: LTRT-10632
Mediant 800B Gateway & E-SBC
Parameter Description
Keypad Feature - Transfer Parameters
Note: See the description of the KeyBlindTransfer parameter for this feature.
Keypad Feature - Call Waiting Parameters
Call Waiting Activate
configure voip > gateway analog
keypad-features > cw-act
[KeyCallWaiting]
Defines the keypad sequence to activate the Call Waiting option.
After the sequence is pressed, a confirmation tone is heard.
Call Waiting Deactivate
configure voip > gateway analog
keypad-features > cw-deact
[KeyCallWaitingDeact]
Defines the keypad sequence to deactivate the Call Waiting
option. After the sequence is pressed, a confirmation tone is
heard.
Keypad Feature - Reject Anonymous Call Parameters
Reject Anonymous Call Activate
configure voip > gateway analog
keypad-features > reject-anony-
call-activate
[KeyRejectAnonymousCall]
Defines the keypad sequence to activate the reject anonymous
call option, whereby the device rejects incoming anonymous calls.
After the sequence is pressed, a confirmation tone is heard.
Reject Anonymous Call
Deactivate
configure voip > gateway analog
keypad-features > reject-anony-
call-deactivate
[KeyRejectAnonymousCallDeact]
Defines the keypad sequence that de-activates the reject
anonymous call option. After the sequence is pressed, a
confirmation tone is heard.
72.11.11 FXO and FXS Parameters
The general FXO and FXS parameters are described in the table below.
Table 72-68: General FXO and FXS Parameters
Parameter Description
Update Port Info
[AnalogPortInfo_x ]
Defines an arbitrary name for an analog (FXS or FXO) port.
This can be used to easily identify the port.
The valid value is a string of up to 40 characters. By default,
the value is undefined.
Note:
For the ini file parameter, the x denotes the port number.
To configure a port name through the Web interface, see
'Configuring Name for Telephony Ports' on page 830.
FXS Parameters
FXS Coefficient Type
configure voip > interface fxs-fxo >
fxs-country-coefficients
[FXSCountryCoefficients]
Determines the FXS line characteristics (AC and DC)
according to USA or Europe (TBR21) standards.
[66] Europe = TBR21
[70] USA = (Default) United States
Note: For the parameter to take effect, a device reset is
To Next Page
Loading...
