AudioCodes Mediant 800B - Page 1269

Version 7.2 1269 Mediant 800B Gateway & E-SBC
User's Manual 72. Configuration Parameters Reference
Parameter Description
[KeyCFBusy]
Forward On Busy or No Answer
configure voip > gateway analog
keypad-features > fwd-busy-or-
no-ans
[KeyCFBusyOrNoAnswer]
Defines the keypad sequence to activate the forward on 'busy or
no answer' option.
Do Not Disturb
configure voip > gateway analog
keypad-features > fwd-dnd
[KeyCFDoNotDisturb]
Defines the keypad sequence to activate the Do Not Disturb
option (immediately reject incoming calls).
To activate the required forward method from the telephone:
1 Dial the user-defined sequence number on the keypad; a dial tone is heard.
2 Dial the telephone number to which the call is forwarded (terminate the number with #); a
confirmation tone is heard.
Forward Deactivate
configure voip > gateway analog
keypad-features > fwd-
deactivate
[KeyCFDeact]
Defines the keypad sequence to deactivate any of the call forward
options. After the sequence is pressed, a confirmation tone is
heard.
Keypad Feature - Caller ID Restriction Parameters
Restricted Caller ID Activate
configure voip > gateway analog
keypad-features > id-restriction-
act
[KeyCLIR]
Defines the keypad sequence to activate the restricted Caller ID
option. After the sequence is pressed, a confirmation tone is
heard.
Restricted Caller ID Deactivate
configure voip > gateway analog
keypad-features > id-restriction-
deact
[KeyCLIRDeact]
Defines the keypad sequence to deactivate the restricted Caller ID
option. After the sequence is pressed, a confirmation tone is
heard.
Keypad Feature - Hotline Parameters
Hot-line Activate
configure voip > gateway analog
keypad-features > hotline-act
[KeyHotLine]
Defines the keypad sequence to activate the delayed hotline
option.
To activate the delayed hotline option from the telephone, perform
the following:
1 Dial the user-defined sequence number on the keypad; a dial
tone is heard.
2 Dial the telephone number to which the phone automatically
dials after a configurable delay (terminate the number with #); a
confirmation tone is heard.
Hot-line Deactivate
configure voip > gateway analog
keypad-features > hotline-deact
[KeyHotLineDeact]
Defines the keypad sequence to deactivate the delayed hotline
option. After the sequence is pressed, a confirmation tone is
heard.