AudioCodes Mediant 800B - Page 115

Version 7.2 115 Mediant 800B Gateway & E-SBC
User's Manual 10. Configuring SSL/TLS Certificates
3. Configure the TLS Context according to the parameters described in the table below.
4. Click Apply, and then reset the device with a save-to-flash for your settings to take
effect.
Table 10-1: TLS Contexts Parameter Descriptions
Parameter Description
General
Index
tls <ID>
[TLSContexts_Index]
Defines an index number for the new table row.
Note: Each row must be configured with a unique index.
Name
name
[TLSContexts_Name]
Defines a descriptive name, which is used when associating
the row in other tables.
The valid value is a string of up to 31 characters.
TLS Version
tls-version
[TLSContexts_TLSVersion]
Defines the supported SSL/TLS protocol version. Clients
attempting to communicate with the device using a different
TLS version are rejected.
 [0] Any - Including SSLv3 = (Default) SSL 3.0 and all TLS
versions are supported.
 [1] TLSv1.0 = Only TLS 1.0.
 [2] TLSv1.1 = Only TLS 1.1.
 [3] TLSv1.0 and TLSv1.1 = Only TLS 1.0 and TLS 1.1.
 [4] TLSv1.2 = Only TLS 1.2.
 [5] TLSv1.0 and TLSv1.2 = Only TLS 1.0 and TLS 1.2.
 [6] TLSv1.1 and TLSv1.2 = Only TLS 1.1 and TLS 1.2.
 [7] TLSv1.0 TLSv1.1 and TLSv1.2 = Only TLS 1.0, TLS
1.1 and TLS 1.2 (excludes SSL 3.0).