AudioCodes Mediant 800B User Manual

Version 7.2 1197 Mediant 800B Gateway & E-SBC
User's Manual 72. Configuration Parameters Reference
Parameter Description

The device supports only the receipt of SIP MWI NOTIFY
messages (the device doesn't generate these messages).
 For more information on MWI, see 'Message Waiting
Indication' on page 600.
MWI Analog Lamp
configure voip > gateway dtmf-
supp-service supp-service-
settings > mwi-analog-lamp
[MWIAnalogLamp]
Global parameter enabling the visual display of MWI.
You can also configure the functionality per specific calls, using
Tel Profiles (TelProfile_MWIAnalog). For a detailed description of
the parameter and for configuring the functionality in the Tel
Profiles table, see 'Configuring Tel Profiles' on page 473.
Note:
 If the functionality is configured for a specific Tel Profile, the
settings of the global parameter is ignored for calls associated
with the Tel Profile.
 The parameter is applicable only to FXS interfaces.
MWI Display
configure voip > gateway dtmf-
supp-service supp-service-
settings > enable-mwi
[MWIDisplay]
Global parameter enabling the sending of MWI information to the
phone display.
You can also configure the functionality per specific calls, using
Tel Profiles (TelProfile_MWIDisplay). For a detailed description of
the parameter and for configuring the functionality in the Tel
Profiles table, see 'Configuring Tel Profiles' on page 473.
Note:
 If the functionality is configured for a specific Tel Profile, the
settings of the global parameter is ignored for calls associated
with the Tel Profile.
 The parameter is applicable only to FXS interfaces.
Subscribe to MWI
configure voip > gateway dtmf-
supp-service supp-service-
settings > subscribe-to-mwi
[EnableMWISubscription]
Enables subscription to an MWI server.
 [0] No (default)
 [1] Yes
Note:
 To configure the MWI server address, use the MWIServerIP
parameter.
 To configure whether the device subscribes per endpoint or
per the entire device, use the parameter SubscriptionMode.
MWI Server IP Address
configure voip > gateway dtmf-
supp-service supp-service-
settings > mwi-srvr-ip-addr
[MWIServerIP]
Defines the MWI server's IP address. If provided, the device
subscribes to this IP address. The MWI server address can be
configured as a numerical IP address or as a domain name. If not
configured, the Proxy IP address is used instead.
MWI Server Transport Type
configure voip > gateway dtmf-
supp-service supp-service-
settings > mwi-srvr-transp-type
[MWIServerTransportType]
Determines the transport layer used for outgoing SIP dialogs
initiated by the device to the MWI server.
 [-1] Not Configured (default)
 [0] UDP
 [1] TCP
 [2] TLS
Note: When set to ‘Not Configured’, the value of the parameter
SIPTransportType is used.
MWI Subscribe Expiration Time Defines the MWI subscription expiration time in seconds.

AudioCodes Mediant 800B Specifications

General

Brand	AudioCodes
Model	Mediant 800B
Category	Gateway
Language	English