AudioCodes Mediant 800B User Manual

User's Manual 1250 Document #: LTRT-10632
Mediant 800B Gateway & E-SBC
Parameter Description
Note:
 For IP-to-Tel calls, the RedirectionNumber and RedirectionName
in the CallTRansferComplete invoke is derived from the P-
Asserted-Identity and Privacy headers in the received SIP INFO
message.
 To include the P-Asserted-Identity header in outgoing SIP
UPDATE messages, set the AssertedIDMode parameter to Add
P-Asserted-Identity.
is-cas-sndhook-flsh
[CASSendHookFlash]
Enables sending Wink signal toward CAS trunks.
 [0] = Disable (default)
 [1] = Enable
If the device receives a mid-call SIP INFO message with flashhook
event body (as shown below) and the parameter is set to 1, the
device generates a wink signal toward the CAS trunk. The CAS wink
signal is done by changing the A bit from 1 to 0, and then back to 1
for 450 msec.
INFO sip:4505656002@192.168.13.40:5060 SIP/2.0
Via: SIP/2.0/UDP 192.168.13.2:5060
From: <sip:06@192.168.13.2:5060>
To: <sip:4505656002@192.168.13.40:5060>;tag=132878796-
1040067870294
Call-ID: 0010-0016-D69A7DA8-1@192.168.13.2
CSeq:2 INFO
Content-Type: application/broadsoft
Content-Length: 17
event flashhook
Note: The parameter is applicable only to T1 CAS protocols.
Release Cause Mapping from ISDN to SIP Table
Release Cause Mapping
Table
configure voip > gateway
manipulation
CauseMapIsdn2Sip
[CauseMapISDN2SIP]
This table parameter maps ISDN Q.850 Release Causes to SIP
responses. The format of the ini file table parameter is as follows:
[CauseMapISDN2SIP]
FORMAT CauseMapISDN2SIP_Index =
CauseMapISDN2SIP_IsdnReleaseCause,
CauseMapISDN2SIP_SipResponse;
[\CauseMapISDN2SIP]
Release Cause Mapping from SIP to ISDN Table
Release Cause Mapping
Table
configure voip > gateway
manipulation
CauseMapSip2Isdn
[CauseMapSIP2ISDN]
This table parameter maps SIP responses to Q.850 Release Causes.
The format of the ini file table parameter is as follows:
[CauseMapSIP2ISDN]
FORMAT CauseMapSIP2ISDN_Index =
CauseMapSIP2ISDN_SipResponse,
CauseMapSIP2ISDN_IsdnReleaseCause;
[\CauseMapSIP2ISDN]
ISDN-to-ISDN Release Cause Code Conversion Table
Release Cause ISDN > ISDN
configure voip > gateway
manipulation cause-map-
isdn2isdn
[CauseMapIsdn2Isdn]
Defines ISDN-to-ISDN release cause code mapping rules.
The format of the ini file table parameter is as follows:
[ CauseMapIsdn2Isdn ]
FORMAT CauseMapIsdn2Isdn_Index =
CauseMapIsdn2Isdn_OrigIsdnReleaseCause,

AudioCodes Mediant 800B Specifications

General

Brand	AudioCodes
Model	Mediant 800B
Category	Gateway
Language	English