AudioCodes Mediant 800B - Page 1305

Version 7.2 1305 Mediant 800B Gateway & E-SBC
User's Manual 72. Configuration Parameters Reference
Parameter Description
sas-notice
[SBCEnableSurvivabilityNotice]
device is currently operating in Survivability mode.
 [0] = Disable
 [1] = Enable
For more information, see 'Enabling Survivability
Display on Aastra IP Phones' on page 787.
SBC Dialog-Info Interworking
configure voip > sbc settings > sbc-dialog-
info-interwork
[EnableSBCDialogInfoInterworking]
Enables the interworking of dialog information
(parsing of call identifiers in XML body) in SIP
NOTIFY messages received from a remote
application server.
 [0] Disable (default)
 [1] Enable
For more information, see 'Interworking Dialog
Information in SIP NOTIFY Messages' on page 695.
configure voip > sbc settings > sbc-keep-call-
id
[SBCKeepOriginalCallId]
Global parameter that enables the device to use the
same call identification (SIP Call-ID header value)
received in incoming messages for the call
identification in outgoing messages. The call
identification value is contained in the SIP Call-ID
header.
You can also configure the functionality per specific
calls, using IP Profiles. For a detailed description of
the parameter and for configuring the functionality in
the IP Profiles table, see Configuring IP Profiles on
page 436.
SBC GRUU Mode
configure voip > sbc settings > sbc-gruu-
mode
[SBCGruuMode]
Determines the Globally Routable User Agent (UA)
URI (GRUU) support, according to RFC 5627.
 [0] None = No GRUU is supplied to users.
 [1] As Proxy = (Default) The device provides same
GRUU types as the proxy provided the device’s
GRUU clients.
 [2] Temporary only = Supply only temporary
GRUU to users. (Currently not supported.)
 [3] Public only = The device provides only public
GRUU to users.
 [4] Both = The device provides temporary and
public GRUU to users. (Currently not supported.)
The parameter allows the device to act as a GRUU
server for its SIP UA clients, providing them with
public GRUU’s, according to RFC 5627. The public
GRUU provided to the client is denoted in the SIP
Contact header parameters, "pub-
gruu". Public GRUU
remains the same over registration expirations. On
the other SBC leg communicating with the
Proxy/Registrar, the device acts as a GRUU client.
The device creates a GRUU value for each of its
registered clients, which is mapped to the GRUU
value received from the Proxy server. In other words,
the created GRUU value is only used between the
device and its clients (endpoints).
Public-GRUU: