AudioCodes Mediant 800B - Page 167

Version 7.2 167 Mediant 800B Gateway & E-SBC
User's Manual 12. Network
Application Traffic / Network Types Class-of-Service (Priority)
SIP
Control Control Premium
SIP over TLS (SIPS)
Control Control Premium
Syslog
Management Bronze
SNMP Traps
Management Bronze
DNS client
Varies according to DNS settings:
 OAMP
 Control
Depends on traffic type:
 Control: Control Premium
 Management: Bronze
NTP
Varies according to the interface
type associated with NTP (see
'Assigning NTP Services to
Application Types' on page 150):
 OAMP
 Control
Depends on traffic type:
 Control: Control Premium
 Management: Bronze
 To configure DiffServ (Layer-3 QoS) values per CoS:
1. Open the QoS Settings page (Setup menu > IP Network tab > Quality folder > QoS
Settings).
2. Click New; the following dialog box appears:
Figure 12-11: Configuring Class of Service
3. Configure DiffServ values per CoS according to the parameters described in the table
below.
4. Click Apply, and then save your settings to flash memory.
Table 12-17: QoS Settings Parameter Descriptions
Parameter Description
Media Premium QoS
media-qos
[PremiumServiceClassMediaDiffServ]
Defines the DiffServ value for Premium Media CoS content.
The valid range is 0 to 63. The default is 46.
Note: You can also configure the the parameter per IP
Profile (IpProfile_IPDiffServ) or Tel Profile
(TelProfile_IPDiffServ).
Control Premium QoS
control-qos
[PremiumServiceClassControlDiffServ]
Defines the DiffServ value for Premium Control CoS content
(Call Control applications).
The valid range is 0 to 63. The default is 40.
Note: You can also configure the the parameter per IP