User's Manual 306 Document #: LTRT-10632
Mediant 800B Gateway & E-SBC
3. Configure an EMS Service according to the parameters described in the table below.
4. Click Apply, and then save your settings to flash memory.
Table 15-24: EMS Services Table Parameter Descriptions
Parameter Description
Index
[EMSService_Index]
Defines an index number for the new table row.
Note:
Each row must be configured with a unique index.
The parameter is mandatory.
Name
service-name
[EMSService_ServiceName]
Defines a descriptive name, which is used when associating the row
in other tables.
The valid value is a string of up to 40 characters. By default, no value
is defined.
Note:
Each row must be configured with a unique name.
The parameter is mandatory.
EMS Primary Server
primary-server
[EMSService_PrimaryServer]
Defines the address of the primary EMS server.
Note: The parameter is mandatory.
EMS Secondary Server
secondary-server
[EMSService_SecondaryServer]
Defines the address of the secondary EMS server.
Listening Interface to devices
dev-login-int
[EMSService_DeviceLoginInterface]
Assigns an HTTP Interface (local, listening HTTP interface:port) for
communication with the client. To configure HTTP Interfaces, see
'Configuring HTTP Interfaces' on page 300.
By default, no value is defined.
Note: The parameter is mandatory.
Listening to EMS Interface
ems-int
[EMSService_EMSInterface]
Assigns an HTTP Interface (local, listening HTTP interface:port) for
communication with the EMS. To configure HTTP Interfaces, see
'Configuring HTTP Interfaces' on page 300.
By default, no value is defined.
Note: The parameter is mandatory.
To Next Page
Loading...
