AudioCodes Mediant 800B - Page 334

User's Manual 334 Document #: LTRT-10632
Mediant 800B Gateway & E-SBC
2. Click New; the following dialog box appears:
Figure 16-6: Bandwidth Profile Table - Dialog Box
3. Configure a rule according to the parameters described in the table below.
4. Click Apply, and then reset the device with a save to flash memory.
Table 16-5: Bandwidth Profile Table Parameter Descriptions
Parameter Description
General
Index
[BWProfile_Index]
Defines an index number for the new table row.
Note: Each row must be configured with a unique index.
Name
name
[BWProfile_Name]
Defines a descriptive name, which is used when associating the row
in other tables.
The valid value is a string of up to 20 characters.
Egress Audio Bandwidth
egress-audio-bandwidth
[BWProfile_EgressAudioBandwidth]
Defines the major (total) threshold for outgoing audio traffic (in Kbps).
Ingress Audio Bandwidth
ingress-audio-bandwidth
[BWProfile_IngressAudioBandwidth]
Defines the major (total) threshold for incoming audio traffic (in Kbps).
Egress Video Bandwidth
egress-video-bandwidth
[BWProfile_EgressVideoBandwidth]
Defines the major (total) threshold for outgoing video traffic (in Kbps).
Ingress Video Bandwidth
ingress-video-bandwidth
[BWProfile_IngressVideoBandwidth]
Defines the major (total) threshold for incoming video traffic (in Kbps).
Total Egress Bandwidth
total-egress-bandwidth
[BWProfile_TotalEgressBandwidth]
Defines the major (total) threshold for video and audio outgoing
bandwidth (in Kbps).
Total Ingress Bandwidth
total-ingress-bandwidth
[BWProfile_TotalIngressBandwidth]
Defines the major (total) threshold for video and audio incoming
bandwidth (in Kbps).
Thresholds