User's Manual 394 Document #: LTRT-10632
Mediant 800B Gateway & E-SBC
Item # Description
7 Displays the device's hardware configuration concerning telephony (Tel/PSTN) trunks and
ports (e.g., FXS, FXO, BRI and E1/T1). It also displays the number of ports. The ports are
displayed as round icons, as shown in Item #6 above.
To configure a trunk (BRI or E1/T1), do the following:
1 Click the icon, and then from the drop-down menu, choose Trunk Settings; the Trunk
Settings page appears.
2 Configure the trunk as desired.
For more information on configuring trunk settings, see Configuring Trunk Settings on
page 493.
8 Links to Web pages relating to commonly required Gateway configuration:
Number Manipulation: Opens the Destination Phone Number Manipulation for IP-to-Tel
Calls table where you can configure destination phone number manipulation rules for
IP-to-Tel calls (see Configuring Number Manipulation Tables on page 555).
Routing: Opens the IP-to-Tel Routing table where you can configure IP-to-Tel routing
rules (see 'Configuring IP-to-Tel Routing Rules' on page 534).
DTMF & Dialing: Opens the DTMF & Dialing page where you can configure DTMF and
dialing related settings.
GW Settings: Opens the Gateway General Settings page where you can configure
general gateway related settings.
To Next Page
Loading...
