User's Manual 538 Document #: LTRT-10632
Mediant 800B Gateway & E-SBC
Parameter Description
Source Phone Prefix
src-phone-prefix
[PstnPrefix_SourcePrefix]
Defines the prefix or suffix of the calling (source) telephone
number.
The prefix can include up to 49 digits. You can use special
notations for denoting the prefix. For example, [100-
199](100,101,105) denotes a number that starts with 100 to 199
and ends with 100, 101 or 105. To denote any prefix, use the
asterisk (*) symbol. To denote calls without a calling number, use
the $ sign. For a description of available notations, see 'Dialing
Plan Notation for Routing and Manipulation Tables' on page
1051.
By default, no value is defined.
Note: If the P-Asserted-Identity header is present in the
incoming INVITE message, the value of the parameter is
compared to the P-Asserted-Identity URI host name (and not the
From header).
Source Host Prefix
src-host-prefix
[PstnPrefix_SrcHostPrefix]
Defines the prefix of the URI host name in the From header of
the incoming INVITE message.
By default, no value is defined. To denote any prefix, use the
asterisk (*) wildcard.
Note: If the P-Asserted-Identity header is present in the
incoming INVITE message, the value of the parameter is
compared to the P-Asserted-Identity URI host name (and not the
From header).
Destination Phone Prefix
dst-host-prefix
[PstnPrefix_DestHostPrefix]
Defines the prefix or suffix of the called (destined) telephone
number. You can use special notations for denoting the prefix.
For example, [100-199](100,101,105) denotes a number that
starts with 100 to 199 and ends with 100, 101 or 105. To denote
any prefix, use the asterisk (*) symbol or to denote calls without
a called number, use the $ sign. For a description of available
notations, see 'Dialing Plan Notation for Routing and
Manipulation Tables' on page 1051.
By default, no value is defined.
The prefix can include up to 49 digits.
Destination Host Prefix
dst-phone-prefix
[PstnPrefix_DestPrefix]
Defines the Request-URI host name prefix of the incoming
INVITE message.
By default, no value is defined. To denote any prefix, use the
asterisk (*) wildcard.
Action
Destination Type
dst-type
[PstnPrefix_DestType]
Defines the type of Tel destination:
[0] Trunk Group (default)
[1] Trunk
Trunk Group ID
trunk-group-id
[PstnPrefix_TrunkGroupId]
Defines the Trunk Group ID to where the incoming SIP call is
sent.
Trunk ID
trunk-id
[PstnPrefix_TrunkId]
Defines the Trunk to where the incoming SIP call is sent.
Note:
If both 'Trunk Group ID' and 'Trunk ID' parameters are
To Next Page
Loading...
