Version 7.2 569 Mediant 800B Gateway & E-SBC
User's Manual 25. Manipulation
Parameter Description
Number of Digits to Leave
num-of-digits-to-leave
[_LeaveFromRight]
Defines the number of digits that you want to retain from the right of the
redirect number.
Prefix to Add
prefix-to-add
[_Prefix2Add]
Defines the number or string that you want added to the front of the
redirect number.
For example, if you enter 9 and the redirect number is 1234, the new
number is 91234.
Suffix to Add
suffix-to-add
[_Suffix2Add]
Defines the number or string that you want added to the end of the
redirect number.
For example, if you enter 00 and the redirect number is 1234, the new
number is 123400.
TON
ton
[_NumberType]
Defines the Type of Number (TON).
 [-1] = (Default) Not configured
 [0] Unknown (default)
 [1] International-Level2 Regional
 [2] National-Level1 Regional
 [3] Network-PSTN Specific
 [4] Subscriber-Level0 Regional
 [6] Abbreviated
The applicable values depend on the NPI value:
 If NPI is set to Unknown, you can set TON to Unknown.
 If NPI is set to Private, you can set TON to one of the following:
Unknown
International-Level2 Regional
National-Level1 Regional
Network-PSTN Specific
Subscriber-Level0 Regional
 If NPI is set to E.164 Public, you can set TON to one of the
following:
Unknown
International-Level2 Regional
National-Level1 Regional
Network-PSTN Specific
Subscriber-Level0 Regional
Abbreviated
For more information on available NPI/TON values, see Numbering
Plans and Type of Number on page 581.
NPI
npi
[_NumberPlan]
Defines the Numbering Plan Indicator (NPI).
 [-1] Not Configured = (Default) Value received from PSTN/IP is used
 [0] Unknown
 [1] E.164 Public
 [9] Private
For more information on available NPI/TON values, see Numbering
Plans and Type of Number on page 581.
Presentation Enables caller ID.
To Next Page
Loading...
Need help?
General
