User's Manual 66 Document #: LTRT-10632
Mediant 800B Gateway & E-SBC
For example, if you do not configure the 'SIP Interface' field (mandatory) for Proxy
Set #0, the Invalid Line icons are displayed for the Proxy Sets table, as
shown below:
Figure 6-11: Invalid Line (Row) Icons
Parameters that reference rows of other configuration tables that are configured
with invalid values: If a row has a parameter that references a row of another table
that has a parameter with an invalid value, the Invalid Reference Line icon is
displayed in the following locations:
• 'Index' column of the row.
• Page title of the table. The total number of invalid rows in the table is also
displayed with the icon.
• Item in the Navigation tree that opens the table.
For example, if you configure IP Group #0 (in the IP Groups table) with a parameter
that references Proxy Set #0, which is configured with an invalid value, Invalid
Reference Line icons are displayed for the IP Groups table, as shown below:
Figure 6-12: Invalid Reference Line Icons
Invalid icon display in drop-down list items of parameters that can reference
rows of other tables:
• If the row has an invalid line (see description above), the Invalid Line icon
appears along side the item.
• If the row has an invalid reference line (see description above), the Invalid
Reference Line icon appears along side it.
For example, when configuring an IP Group, the 'Proxy Set' parameter's drop-down
list displays items: Proxy Set #0 with indicating that it has an invalid parameter
value, and Proxy Set #1 with indicating that it has a parameter that is referenced to
a row of another table that has an invalid value:
To Next Page
Loading...
