Version 7.2 705 Mediant 800B Gateway & E-SBC
User's Manual 34. Routing SBC
2. Click New; the following dialog box appears:
Figure 34-2: Classification Table - Add Dialog Box
3. Configure the Classification rule according to the parameters described in the table
below.
4. Click Apply.
Table 34-1: Classification Table Parameter Descriptions
Parameter Description
SRD
srd-name
[Classification_SRDName]
Assigns an SRD to the rule as a matching characteristic for
the incoming SIP dialog.
If only one SRD is configured in the SRDs table, the SRD
is assigned to the rule by default. If multiple SRDs are
configured in the SRDs table, no value is assigned.
To configure SRDs, see 'Configuring SRDs' on page 347.
Note: The parameter is mandatory.
Match
Index
[Classification_Index]
Defines an index number for the new table row.
Note: Each row must be configured with a unique index.
Name
classification-name
[Classification_ClassificationName]
Defines a descriptive name, which is used when
associating the row in other tables.
The valid value is a string of up to 40 characters. By
default, no name is defined.
Note: Each row must be configured with a unique name.
Source SIP Interface
src-sip-interface-name
[Classification_SrcSIPInterfaceName]
Assigns a SIP Interface to the rule as a matching
characteristic for the incoming SIP dialog.
The default is Any (i.e., all SIP Interfaces belonging to the
SRD assigned to the rule).
To Next Page
Loading...
