User's Manual 754 Document #: LTRT-10632
Mediant 800B Gateway & E-SBC
For incoming calls with prefix number "53124", the rule with tag B is chosen (suffix is
more specific for digit "4"):
Prefix Tag
53([2-4]) A
53(4),B B
Dial Plans are configured using two tables with parent-child type relationship:
Parent table: Dial Plan table, which defines the name of the Dial Plan. You can
configure up to 10 Dial Plans.
Child table: Dial Plan Rule table, which defines the actual dial plans (rules) per Dial
Plan. You can configure up to 2,000 dial plan rules in total (where all can be
configured for one Dial Plan or configured between different Dial Plans).
The following procedure describes how to configure Dial Plans through the Web interface.
You can also configure it through other management platforms:
Dial Plan table: ini file (DialPlan) or CLI (configure voip > sbc dial-plan)
Dial Plan Rule table: ini file (DialPlanRule) or CLI (configure voip > sbc dial-plan-rule)
To configure Dial Plans:
1. Open the Dial Plan table (Setup menu > Signaling & Media tab > SBC folder > Dial
Plan).
2. Click New; the following dialog box appears:
Figure 36-2: Dial Plan Table - Add Dialog Box
3. Configure a Dial Plan name according to the parameters described in the table below.
4. Click Apply.
Table 36-2: Dial Plan Table Parameter Descriptions
Parameter Description
Index
[DialPlan_Index]
Defines an index number for the new table row.
Note: Each row must be configured with a unique index.
Name
name
[DialPlan_Name]
Defines a descriptive name, which is used when associating the
row in other tables.
The valid value is a string of up to 15 characters.
Note: Each row must be configured with a unique name.
5. In the Dial Plan table, select the row for which you want to configure dial plan rules,
and then click the Dial Plan Rule link located below the table; the Dial Plan Rule table
appears.
To Next Page
Loading...
