User's Manual 806 Document #: LTRT-10632
Mediant 800B Gateway & E-SBC
To define a name for the device:
1. Open the HA Settings page (Setup menu > IP Network tab > Core Entities folder >
HA Settings).
2. In the 'HA Device Name' field, enter a name for the active device.
3. In the 'Redundant HA Device Name' field, enter a name for the redundant device.
Figure 41-1: Configuring Device Names for HA
4. Click Apply.
Note: Once the devices are running in HA mode, you can change the name of the
redundant device, through the active device only, in the 'Redundant HA Device Name'
field.
To Next Page
Loading...
