AudioCodes Mediant 800B - Page 850

User's Manual 850 Document #: LTRT-10632
Mediant 800B Gateway & E-SBC
2. Click New; the following dialog box appears:
Figure 47-6: GW User Info Table - Add Dialog Box
3. Configure a user according to the table below.
4. Click Apply.
5. To register a user, select the user's table entry, and then from the Action drop-down
list , choose Register. To un-register a user, select the user, and then from the Action
drop-down list , choose Un-Register.
Table 47-2: GW User Info Table Parameter Descriptions
Parameter Description
Index
[GWUserInfoTable_Index]
Defines an index number for the new table row.
Note: Each row must be configured with a unique index.
PBX Extension
[GWUserInfoTable_PBXExtension]
Defines the PBX extension number.
The valid value is a string of up to 10 characters.
Note: The parameter is mandatory.
Global Phone Number
[GWUserInfoTable_GlobalPhoneNumber]
Defines the "global" phone number for the IP side.
The valid value is a string of up to 20 characters.
Note: The parameter is mandatory.
Display Name
[GWUserInfoTable_DisplayName]
Defines the Caller ID of the PBX extension.
The valid value is a string of up to 30 characters.
Username
[GWUserInfoTable_Username]
Defines the username for registering the user when
authentication is necessary.
The valid value is a string of up to 40 characters.
Password
[GWUserInfoTable_Password]
Defines the password for registering the user when
authentication is necessary.
The valid value is a string of up to 20 characters.
Status (Read-only field) Displays the status of the user -
"Registered" or "Not Registered".