User's Manual 922 Document #: LTRT-10632
Mediant 800B Gateway & E-SBC
• For analog ports: The following page appears with the Basic tab selected:
Figure 55-3: Viewing Analog Port Status
4. To view additional channel information, click the required tab - SIP, RTP/RTCP, and
Voice Settings.
Table 55-2: Port Status Description
Tab Field Description
SIP
Endpoint Status Status of endpoint:
 "IDLE": No call
 "ACTIVE": Active call
Assigned Phone Number Phone number of the port.
Hunt Group Trunk Group to which the port is assigned. To
configure Trunk Groups, see Configuring Trunk
Groups on page 517
MWI Information Indicates if the phone has a voice-mail message
(Message Waiting Indicator):
 "yes": Endpoint has a voice-mail message.
 "...": No voice mail for the endpoint.
Note: The field is applicable only to FXS
interfaces.
Call ID Call ID number of the call (SIP Call-ID header).
Call Originator Caller:
 "TEL": Call made from Tel side (i.e., the port)
 "IP": Call made from IP side
Source Tel Number Telephone number of the caller.
Destination Tel Number Telephone number of the called party.
To Next Page
Loading...
Need help?
General
