AudioCodes Mediant 800B - Page 991

Version 7.2 991 Mediant 800B Gateway & E-SBC
User's Manual 63. Reporting Information to External Party
2. Click New; the following dialog box appears:
Figure 63-8: SBC CDR Format Table - Add Dialog Box
3. Configure the CDR according to the parameters described in the table below.
4. Click Apply.
Examples of configured CDR customization rules are shown below:
Figure 63-9: Examples of SBC CDR Customization Rules
Table 63-8: SBC CDR Format Table Parameter Descriptions
Parameter Description
Index
[SBCCDRFormat_Index]
Defines an index number for the new table row.
Note: Each row must be configured with a unique index.
CDR Type
cdr-type
[SBCCDRFormat_CDRType]
Defines the application type for which you want to customize CDRs.
 [1] Syslog SBC = (Default) Customizes CDR fields for SIP
signaling-related CDRs sent in Syslog messages.
 [3] Syslog Media = Customizes CDR fields for media-related
CDRs sent in Syslog messages.
 [5] Local Storage SBC = Customizes CDR fields that are stored
locally on the device. Only signaling-related CDRs are stored
locally on the device.
 [7] RADIUS SBC = Customizes CDR fields (i.e., RADIUS
Attributes) for CDRs sent in RADIUS accounting request
messages.
Field Type
col-type
[SBCCDRFormat_FieldType]
Defines the CDR field (column) that you want to customize. The
applicable CDR field depends on the settings of the 'CDR Type'
parameter:
 For all types: [300] CDR Type (default); [301] Call ID; [302]
Session ID; [303] Report Type; [304] Media Type; [305]