Automationdirect.com DL05 User Manual

Standard
RLL Instructions
5–47
Standard RLL Instructions
Accumulator / Stack Load and Output Data Instructions
V1400 (P1400) contains the value 440
HEX. 440 HEX. = 2100 Octal which
contains the value 2635.
LD
P2000
X1
OUT
V2200
Copy the data from the lower 16 bits of
the accumulator to V2200.
V2000
0440
V2076
XXXX
V2077
XXXX
V2100
2635
V2101
XXXX
V2102
XXXX
V2103
XXXX
V2104
XXXX
V2105
XXXX
V2200
2635
V2201
XXXX
2635
S
S
Accumulator
The following example is identical to the one above with one exception. The LDA
(Load Address) instruction automatically converts the Octal address to Hex.
V2000 (P2000) contains the value 440
Hex. 440 Hex. = 2100 Octal which
contains the value 2635
LDA
O 2100
X1
OUT
V 2000
Copy the data from the lower 16 bits of
the accumulator to V2000
V2100
0440
V2076
XXXX
V2077
XXXX
V2100
2635
V2101
XXXX
V2102
XXXX
V2103
XXXX
V2104
XXXX
V2105
XXXX
S
S
V2200
2635
V2201
XXXX
S
S
LD
P 2000
OUT
V 2200
Copy the data from the lower 16 bits of
the accumulator to V2200
Load the lower 16 bits of the
accumulator with Hexadecimal
equivalent to Octal 2100 (440)
V2000
Acc.
2100
0440
0000 0440
2100 Octal is converted to Hexadecimal
440 and loaded into the accumulator
Accumulator
0000 2635
Unused accumulator bits
are set to zero

Automationdirect.com DL05 Specifications

General

Brand	Automationdirect.com
Model	DL05
Category	Controller
Language	English